Wow! The 10/22 rabbit hole is deep and slippery!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

aarondhgraham

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Jul 30, 2010
Messages
2,612
Reaction score
4,471
Location
Stillwater
Actually, I've been a member of RFC for well over a decade,,,
But I mostly just post in the CZ handgun threads,,,
And reply to interesting thread titles.

There is some serious knowledge over there for certain,,,
Just like there is here at okshooters.

For the past few days I've been perusing the 10/22 picture threads,,,
Because for me there are two important factors a rifle needs.

Accuracy and overall performance are paramount,,,
But also life is too short to shoot an ugly rifle.

That rifle that Glocktogo posted about on page one,,,
Is one seriously sexy fiery-arm.

I'm not at all attracted to tactical/skeleton stocks,,,
That Boyd stock he used screams elegance.

I prefer heavier barrels as well,,,
When they are mounted in the Barracuda stocks,,,
They have very sleek lines, especially with the fluted barrels.

No polymer stocks though,,,
Either a real piece of a tree or laminated wood would work.

I have a CZ-457 Varmint with the Boyd's AT-1 stock,,,
It's adjustments were easy enough to make it fit me very nicely,,,
But I feel it could use a bit of judicious rasp work to round a few uncomfortable edges.

It's all speculation right now,,,
The book I ordered will be here next week,,,
When it gets here I can start learning what can go into a build.

Until then I'll just keep surfing all the eye-candy pictures.

That was a hint Gentlemen,,,
Please post as many 10/22 pics here as you desire.

Aarond

.
 

Letfreedomring

Sharpshooter
Special Hen
Joined
Feb 21, 2022
Messages
2,391
Reaction score
6,378
Location
74053
Actually, I've been a member of RFC for well over a decade,,,
But I mostly just post in the CZ handgun threads,,,
And reply to interesting thread titles.

There is some serious knowledge over there for certain,,,
Just like there is here at okshooters.

For the past few days I've been perusing the 10/22 picture threads,,,
Because for me there are two important factors a rifle needs.

Accuracy and overall performance are paramount,,,
But also life is too short to shoot an ugly rifle.

That rifle that Glocktogo posted about on page one,,,
Is one seriously sexy fiery-arm.

I'm not at all attracted to tactical/skeleton stocks,,,
That Boyd stock he used screams elegance.

I prefer heavier barrels as well,,,
When they are mounted in the Barracuda stocks,,,
They have very sleek lines, especially with the fluted barrels.

No polymer stocks though,,,
Either a real piece of a tree or laminated wood would work.

I have a CZ-457 Varmint with the Boyd's AT-1 stock,,,
It's adjustments were easy enough to make it fit me very nicely,,,
But I feel it could use a bit of judicious rasp work to round a few uncomfortable edges.

It's all speculation right now,,,
The book I ordered will be here next week,,,
When it gets here I can start learning what can go into a build.

Until then I'll just keep surfing all the eye-candy pictures.

That was a hint Gentlemen,,,
Please post as many 10/22 pics here as you desire.

Aarond

.
Please don't shoot the messenger!!!
https://wooxstore.com/collections/ruger-10-22-stock:bolt:
 

foghorn918

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Feb 23, 2010
Messages
12,400
Reaction score
1,726
Location
Yukon
Actually, I've been a member of RFC for well over a decade,,,
But I mostly just post in the CZ handgun threads,,,
And reply to interesting thread titles.

There is some serious knowledge over there for certain,,,
Just like there is here at okshooters.

For the past few days I've been perusing the 10/22 picture threads,,,
Because for me there are two important factors a rifle needs.

Accuracy and overall performance are paramount,,,
But also life is too short to shoot an ugly rifle.

That rifle that Glocktogo posted about on page one,,,
Is one seriously sexy fiery-arm.

I'm not at all attracted to tactical/skeleton stocks,,,
That Boyd stock he used screams elegance.

I prefer heavier barrels as well,,,
When they are mounted in the Barracuda stocks,,,
They have very sleek lines, especially with the fluted barrels.

No polymer stocks though,,,
Either a real piece of a tree or laminated wood would work.

I have a CZ-457 Varmint with the Boyd's AT-1 stock,,,
It's adjustments were easy enough to make it fit me very nicely,,,
But I feel it could use a bit of judicious rasp work to round a few uncomfortable edges.

It's all speculation right now,,,
The book I ordered will be here next week,,,
When it gets here I can start learning what can go into a build.

Until then I'll just keep surfing all the eye-candy pictures.

That was a hint Gentlemen,,,
Please post as many 10/22 pics here as you desire.

Aarond

.
Here's a thread with custom 10/22 parts and pics
Show Off Your 10/22 Custom Build
 

dlbleak

Sharpshooter
Staff Member
Supporting Member
Special Hen Administrator Moderator Supporter
Joined
Mar 15, 2009
Messages
21,797
Reaction score
27,362
Location
edmond
Dang Letfreedomring,,,
Those stocks would eat up half the budget I have for the build!

But they certainly are pretty,,,
Thanks for that link.

Aarond

.
I see that you can make payments on them😂. If I ever need to make payments on a stock, I’m in over my head!
 

Beau B

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
May 7, 2018
Messages
897
Reaction score
2,713
Location
Edmond
IMG_3667.jpeg
IMG_3666.jpeg
IMG_3665.jpeg
IMG_3664.jpeg
I’ve got a couple!
 

Latest posts

Top Bottom