41 short

[GUN DOG]

Had a case separation in my resizing die any hints of how to remove it

 

[Firpo]

IDK. Try tossing it in the freezer for a bit after you remove the de-capping pin. Brass conducts heat about 4 times faster than steel. So maybe it will shrink enough to release. Maybe you could wedge a brass bore brush in the case and pull it out. Just something to try. I’d also try a little Kroil as well.

 

[Chaparral]

Definitely need to remove the pin. Oil, could be motor oil, freeze, wood dowel, tap out.

 

[turkeyrun]

IF it is a RCBS die, send to them and they will do it.

 

[Zachrankin]

Rcbs and Lee will remove or replace it.

 

[oksportsman]

Hornady removes stuck cases too