Adding rifle Sights to Shotgun (brazing)

[HiredHand]

If it were me I'd just buy an 18.5" barrel with rifle sights already installed.

This is such good advice its worth repeating...

 

[GUN DOG]

I used the adheasive that http://www.poly-choke.com/ uses to attach vent ribs to barrels. I put a ramp on the front & adjustible sight on the back of an H&R 12 ga barrel to make a turkey gun. You could use rifled slugs in it as well. I did this probably 6+ years ago & it is as good as new. E mail him & see if you can get a tube it was $10 or so + shipping

 

[tyromeo55]

Gorilla Glue

 

[Traxxis]

Gorilla Glue

Tyler... don't you know that any 'smith worth his weight uses JB Weld!

 

[Matthew77]

I know that H&H can install a ghost ring setup from Wilson Combat. They have a template tool to make sure the holes are drilled in the receiver correctly. I think it was like $150 or so...

 

[goodoleboy]

I know that H&H can install a ghost ring setup from Wilson Combat. They have a template tool to make sure the holes are drilled in the receiver correctly. I think it was like $150 or so...

$150 Ouch! Someone mentioned getting a barrel already setup for it maybe being cheaper..

 

[HiredHand]

$150 Ouch! Someone mentioned getting a barrel already setup for it maybe being cheaper..

Here's an example. http://www.midwayusa.com/viewProduct/default.aspx?productNumber=496356

I would imagine you could get an even better deal on a used barrel. There's also a guy, J&J, that I usually see at the larger gunshows that sells barrels.

 

[gsarg]

I know that H&H can install a ghost ring setup from Wilson Combat. They have a template tool to make sure the holes are drilled in the receiver correctly. I think it was like $150 or so...

$150 for just the install? If so, that's just criminal. Scattergun Tech (Wilson Combat) charges $140 for the sights WITH install.

 

[HiredHand]

Tyler... don't you know that any 'smith worth his weight uses JB Weld!

But gorillas use gorilla glue...