So last night I decided to strip my MKIII down for the first time. I had a very hard time getting the mainspring housing up and while trying to pull it down to remove the bolt retaining pin I could only get it about half way down. I decided I was going to wait till I had more time this weekend.I was having a hard time getting the bolt retaining pin pushed back through so I cycled the bolt, this is where Im sure I messed up. I got the pin back through and the main spring housing back down. Now the bolt will only move about 1/4 of the way back and I now I can only get the main spring housing up a little bit before it gets tight.
What do I need to do? And how bad did I mess up?
What do I need to do? And how bad did I mess up?