I finally got my new 6.5-06 put together. I bought a factory 110 30-06 and turned it into a longrange machine. Components are as follows
Timney trigger
1:8 twist 26" mcgowen varmint contour blank chambered and crowned by apache gun works
Trued barrel nut and .25" trued recoil lug from northland shooters supply
Warne bases
Burris tactical rings
Vortex 6.5-20x44 scope
Choate tactical stock I had a gunsmith inlet it for the factory mag. I wanted to go with Cdi bottom metal but I started on my surgeon build as well and decided to spend more money on the surgeon. Put everything together with a friend first savage build (he's done a couple of barrel swaps)
I have just over a grand in this build including the cost of the savage package. Only test fired it once so far hope to shoot it and try some test loads this weekend.
Sent from NSA wire tapped device.
Timney trigger
1:8 twist 26" mcgowen varmint contour blank chambered and crowned by apache gun works
Trued barrel nut and .25" trued recoil lug from northland shooters supply
Warne bases
Burris tactical rings
Vortex 6.5-20x44 scope
Choate tactical stock I had a gunsmith inlet it for the factory mag. I wanted to go with Cdi bottom metal but I started on my surgeon build as well and decided to spend more money on the surgeon. Put everything together with a friend first savage build (he's done a couple of barrel swaps)
I have just over a grand in this build including the cost of the savage package. Only test fired it once so far hope to shoot it and try some test loads this weekend.
Sent from NSA wire tapped device.