Older Bolt action

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ronny

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Sep 7, 2009
Messages
6,207
Reaction score
957
Location
Ardmore
Actually, you pull back on the cocking knob and rotate it a quarter turn (or less) to the left (counterclockwise).
 

MoBoost

Sharpshooter
Special Hen
Joined
Mar 14, 2008
Messages
4,292
Reaction score
14
Location
Midwest City
"Seriously, it is a pain".No it's easy to set the safety.Most Americans never
knew the way the russkies meant the safety to be set.In the USA that type
bolt action safety would be set when the bolt loaded the bullet.In the Molsin
when you load & close the bolt,you then grab the safety at the rear.

Point the rifle in a safe direction.Pull the trigger with one hand while the other holding the rear safety an easy it down.When ready to fire, just
kick bolt up an then cock it once more.That,s the design.

In soviet manual it doesn't say to hold the trigger - as a matter of fact if you slip it WILL fire. You are supposed to set it back on the sear in "fire" position.
 

30BulletHoles

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Jun 17, 2009
Messages
1,721
Reaction score
80
Location
Woodward
If you're wanting to put a scope on the rifle anyway, why not buy one that's already sporterized. Mosins and Mausers that have been sporterized can usually be bought cheaper than buying one in origional condition and doing it yourself.
 

RedneckZombie

Marksman
Special Hen
Joined
Oct 22, 2009
Messages
96
Reaction score
0
Location
N.E. Okla.
If you're wanting to put a scope on the rifle anyway, why not buy one that's already sporterized. Mosins and Mausers that have been sporterized can usually be bought cheaper than buying one in origional condition and doing it yourself.

Definately the route I would take, unless your just really into the classic military appearance. And I would take a Mauser over a Mosin any day of the week.
 

Fly

Sharpshooter
Special Hen
Joined
Sep 28, 2008
Messages
166
Reaction score
0
Location
Vian OKLA
In soviet manual it doesn't say to hold the trigger - as a matter of fact if you slip it WILL fire. You are supposed to set it back on the sear in "fire" position.
Funny for I was shown that by a nice ole Russian
officer at a gun range in Tucson Az.He told me thats the way they had done it
for years.:preocc:
 

ronny

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Sep 7, 2009
Messages
6,207
Reaction score
957
Location
Ardmore
Funny for I was shown that by a nice ole Russian
officer at a gun range in Tucson Az.He told me thats the way they had done it
for years.:preocc:

That's undoubtedly true. And, it also works. But pulling the trigger is not what I would teach a newbie. It also sort of takes three hands.:)
 

Fly

Sharpshooter
Special Hen
Joined
Sep 28, 2008
Messages
166
Reaction score
0
Location
Vian OKLA
Well as you guys also know the Russians also sighted those rifles in with a fixed
bayonet & almost never allowed to remove it.I think the Ole fellow told me the
only time they were allowed to remove the bayonet was when they were on a train.

The Soviets were different cat's for sure.I think that's why I love the Molsins
so much.That rifle has fought on more fronts than any.
 

Latest posts

Top Bottom