I REALLY need help

[dennishoddy]

Got it loose. Did just like you said bassin

Now to clean.

That process is called "mortaring" the gun.
SOP for opening stuck bolts on the AR platform.

 

[Eagle Eye]

I got most parts cleaned up. Just have the trigger group left. The trigger is locked and will not release.

I suppose I'll have to take it apart completely cause there are so many nooks and crannies. Ill have to do some studying before i attempt that.

Thanks for the help guys.

 

[Oklahomabassin]

Got it loose. Did just like you said bassin

Now to clean.

Good deal.

 

[turkeyrun]

just an FYI about Methylene chloride

MeCl is BAD stuff. Do not breathe vapors. Do not get skin. Plastic parts may compromised or ruined.

After soaking, air dry and oil well.

 

[crrcboatz]

Put an old screwdriver directly onto the area where the stuff is setup. Take a heat gun and heat the screwdriver shaft. It should soften up the blue stuff enough to loosen it. I found the blue medium strength stuff in a gel at NAPA. It keeps you from wasting it and works the same as the liquid stuff.

 

[lkothe]

Learn something new and useful every day, thankfully it wasn't my oooops this time.