Looking for a smith who is good with 1911's in the Lawton / OKC side of the state

[wolfman1]

Got a nice one but light strikes most of the time. I expect its the firing pin and spring but Im not at all mechanically minded and tend to lose or **** up small parts. A buddy recommended some ether in the firing pin hole to clean out any gunk, so Ill try that, then oil it,

Could use good recommendations just in case.

 

[Letfreedomring]

@SPDguns

 

[okierider]

^^^^^ What he said!

 

[archer]

If you are getting hammer strikes too light to set off the primer, its your mainspring. Someone probably cut it too short in order to do a "trigger job". It's an easy fix. Look up 1911 trigger jobs on You Tube. No need to pay a gunsmith to change out a mainspring.