Anyone know a good gunsmith in the Tulsa area that can remove a RRA free float hand guard barrel nut. I want to change to a slim hand guard but I don't have a pin spanner wrench to get this puppy off.
I'd bet Charles at SHC could do it. His member name is repete34.
Problem solved, I used the spanner wrench that came with an MI forearm, just put some pins in the nut holes and used the nubs on the wrench to backup on the pins. A 2 foot cheater bar got it off with no damage to the nut. By the way there was no loctite used in the assembly from RRA.
I have several barrel nut wrenches, and if you buy the parts from us we usually install them for FREE!
Good job sir well played
I'm finally converting to a free float rail, my barrel nut tool fits my delta ring.
However it does not fit into my free float barrel nut...
Is there another special tool I need, to properly torque this to the correct spec?
Thanx in advance,
~SD
However it does not fit into my free float barrel nut...
Is there another special tool I need, to properly torque this to the correct spec?
Thanx in advance,
~SD
Is that a YHM barrel nut and jam nut? Even if not, it should work with your standard AR armorer's wrench. Mine always have. As for the jam nut, you'll probably need a special tool to get that just right. I've got one. Bring it all out to our AR build party in Tulsa on the 17th. Someone's bound to have what you need.
Sounds fun & Thanx for the invite, I'll see if I can make it.
I'm not sure what brand this nut is?
I bought my free float rail kit from the gun show here in OKC, it all came together...
What does your 2 tools you're talking about look like?
~SD
I'm not sure what brand this nut is?
I bought my free float rail kit from the gun show here in OKC, it all came together...
What does your 2 tools you're talking about look like?
~SD
Armorer's wrench:
[Broken External Image]
YHM jam nut wrench:
[Broken External Image]
YHM jam nut wrench:
Similar threads
- Sale Price: 950$
