Nice setups. I am diggin' the flame job.
This is the Super Gun. It is my switch barrel benchrest/varmint gun that I had made. I decided at the time that it was stupid to have more than one gun. You really only need one gun… saves on scopes and such. Based on this theory, I decided to sell all my old guns and scopes and just buy one “Super Gun”.
The action is a Remington 40x benchrest single shot trued by S and S Precision. The bolt was custom made for the 6BR. The trigger is the original 40x set at about 4 oz.
The stock is a fiberglass Shehane made by McMillan. The scope is a Nightforce 12-42 x 56 Benchrest (the best one can buy right now).
I have two barrels and two bolts. One bolt accommodates all of the 30-06 derived cartridges, and the other the 223 derived cartridges.
Here is the article:
http://www.urbanrifleman.com/2013/04/11/29/
My Remington 700 223 AI
I built this gun I did all the work myself except for the rechambering. I had the 223 rechambered using the same reamer as the Super Gun so both fireform the same into 223AI.
Remington 700 BDL all stainless
1-12 twist Rem barrel shortened 1/2″ and re-chambered by Stick at S & S Precision.
Old Rem trigger set to 1lbs by me.
Zero Laminated tactical stock finished by me.
Cordovan shoe dye for stock color (same I used to use on M-1 Garands)
Minwax poly clear spray can (this stuff is great really). Wet sanded and buffed about 12 years ago (still looks good huh?)
Action fully bedded into stock by me with JB Weld (great for bedding BTW)
B & L Elite 4200 6-24 varmint scope with Leupold rings and EGW 0 MOA base.
[Broken External Image]
Here is the whole article:
http://www.urbanrifleman.com/2013/04/11/remington-700-bdl-223ai-built-my-me/
I built this gun I did all the work myself except for the rechambering. I had the 223 rechambered using the same reamer as the Super Gun so both fireform the same into 223AI.
Remington 700 BDL all stainless
1-12 twist Rem barrel shortened 1/2″ and re-chambered by Stick at S & S Precision.
Old Rem trigger set to 1lbs by me.
Zero Laminated tactical stock finished by me.
Cordovan shoe dye for stock color (same I used to use on M-1 Garands)
Minwax poly clear spray can (this stuff is great really). Wet sanded and buffed about 12 years ago (still looks good huh?)
Action fully bedded into stock by me with JB Weld (great for bedding BTW)
B & L Elite 4200 6-24 varmint scope with Leupold rings and EGW 0 MOA base.
[Broken External Image]
Here is the whole article:
http://www.urbanrifleman.com/2013/04/11/remington-700-bdl-223ai-built-my-me/
nice!
