Ok, first build complete! Will be taking it to the range tomorrow evening to test it out.
PCC - 9mm
17D billet lower
9mm billet upper (bought locally from another OSA member)
Stern Defense Barrel - 16.1" 1:10
Bolt - SD BU9 NiB ECHO
Stern Defense Mag Adapter - MAG-AD9
CMC 3.5lb single stage flat trigger with anti-walk pin set
Comp - SD CB9 MOD1
Buffer - H3
Buffer Spring - Wolff carbine spring
Hogue grip and stock
Vltor buffer tube
Sig Romeo 5 red dot
My one concern on this build was the amount of bolt travel past the bolt stop. I've heard of PCC's breaking the bolt stop because that bolt gets a running start then smashes into the stop, breaking it. I put a stack of quarters in the buffer tube and shortened the amount of bolt travel so it only goes about 1/4" past the bolt stop. When test firing tomorrow I might need to adjust the spacer length to get it dialed in. For now though, she's assembled.
I got so excited I took the pictures before cleaning it after assembly!
PCC - 9mm
17D billet lower
9mm billet upper (bought locally from another OSA member)
Stern Defense Barrel - 16.1" 1:10
Bolt - SD BU9 NiB ECHO
Stern Defense Mag Adapter - MAG-AD9
CMC 3.5lb single stage flat trigger with anti-walk pin set
Comp - SD CB9 MOD1
Buffer - H3
Buffer Spring - Wolff carbine spring
Hogue grip and stock
Vltor buffer tube
Sig Romeo 5 red dot
My one concern on this build was the amount of bolt travel past the bolt stop. I've heard of PCC's breaking the bolt stop because that bolt gets a running start then smashes into the stop, breaking it. I put a stack of quarters in the buffer tube and shortened the amount of bolt travel so it only goes about 1/4" past the bolt stop. When test firing tomorrow I might need to adjust the spacer length to get it dialed in. For now though, she's assembled.
I got so excited I took the pictures before cleaning it after assembly!
Last edited: