reduced mosin loads question

[dlbleak]

oh now, thats way cool. i'm already set up for 32 so its a no brainer. i have looked at other adapters but was not aware of the 7.62x54 yet. check these out
www.mcace.com

 

[Old Fart]

I bought mine before the price went up, seems I blew about $5-6 on it. Now they're $13+.

 

[Blitzfike]

I have the 32acp adaptor for the 303 Brit, and the 7.62X25 adaptor for the Mosin.. Lots of punch with the 7.62X25

 

[criticalbass]

If you have crimp problems, look into the Lee crimp die. No more bent cases, and no need for a cannelure. This die really reduces the MV variation if it's used properly, and is especially good with big kickers that might move bullets in their cases in the magazine. CB

 

[Euclid]

Isn't the blue line the VELOCITY for a given barrel length?

The red line is pressure at x barrel length.

The blue line is pressure at x barrel length.

It should clear the barrel just fine. The pressure will be a tiny bit higher than the graph shows because I used a definition for a .309 bullet as I don't use .310 bullets for anything. It should be really low recoil.

 

[kd5rjz]

Isn't the blue line the VELOCITY for a given barrel length?

Yes, you are correct, it is VELOCITY, as labeled on the graph. Sorry about the typo.