WT Borrow rem 700 SA firing pin removal tool

[JEFFBIGWOOD]

Need to swap out a spring real quick. Anyone around Yukon/mustang/okc have one. Will give $20 for your troubles! Or if you know of a trick to do it without one fill me in.

Thanks
Jeff

 

[Huckelberry75]

Flat screw driver and a dime will do it for the firing line spring. Pull cocking piece back with flat screw driver and rotate bolt. Slip dime between rear face of bolt body and cocking piece as you unscrew. Rudimentary but will do it in a pinch.

 

[JEVapa]

Use a boot lace or a piece of 550 cord. To take the assembly down, you need a vice and a couple other hands/fingers to help you compress the spring and drive out the retaining pin.

 

[Louro]

This is how I remove my to change the spring last time.

 

[JEFFBIGWOOD]

Thanks all. Got it swapped out. Cut this small tube 3/4 inch and you drop down in the bolt body and use it to push the deal out to get the pin out.