I just bought a 10mm and I plan on reloading for it does anybody have any suggestions on loads for plinking or hunting. I plan to stay with a 150-180 grain bullet.
Learn your ejection pattern, because you will rarely find 10mm brass to pick up.
I have quite a few plated 165gr bullets I bought awhile back to load .40 but then got out of the caliber. I now have a G20 and was planning to load up a bunch of those to plink with. In addition I have a Mech Tech 10mm upper ordered for the G20 so I suspect I might be plowing through a bit more ammo. You can get 10mm brass from a few sellers on Gunbroker.
To the original question, I don't have any loads worked up but will be at some point in the near future.
To the original question, I don't have any loads worked up but will be at some point in the near future.
Some info I found on other forums
http://www.shootersforum.com/handgun-cartridges/65491-full-power-p-10mm-auto-recipes.html
http://glocktalk.com/forums/showthread.php?t=1357227
http://10mm-firearms.com/reloading-10mm-ammo/180gr-bullets-over-longshot/
Just trying to consolidate some 10mm info
http://www.shootersforum.com/handgun-cartridges/65491-full-power-p-10mm-auto-recipes.html
http://glocktalk.com/forums/showthread.php?t=1357227
http://10mm-firearms.com/reloading-10mm-ammo/180gr-bullets-over-longshot/
Just trying to consolidate some 10mm info
My full house 10MM load is 13.5grns of Accurate Arms #9, 180grn Speer Gold Dot, 1.250 OAL, Winchester primers. This is shot out of my Glock 20SF was running 1320-1340 FPS.
I worked this up my self and is listed at the max, but as always I recommend you do the same.
Glad to see some other 10 shooters on here.
I worked this up my self and is listed at the max, but as always I recommend you do the same.
Glad to see some other 10 shooters on here.
I just follow the manuals. I even saw loads for 10mm using titegroup so I gave it a try.
It worked surprisingly well for plinking, no malfunctions. I used the minimum load, can't remember the exact powder charge with 180gr lead bullet. Titegroup only develops min velocities with 10mm as I recall.
