Dillon Square Deal caliber markings

[TheDoubleD]

Does any one know how to tell what cartridge a Dillon Square Deal is set up for. I can not see any obvious markings.

 

[chazroh]

The seating stem on top should have caliber marking and if you take the toolhead off, the dies should be stamped.

 

[Rez Exelon]

They would be marked in the following spots:

 

[TheDoubleD]

Thanks, I pulled the two gold colored bolts and can see the inserts down inside. They did not want to come out past a the band of blue loctite. This is the Grand sons set up that he got from his other late Grampa. If he wishes to use force he may. we suspect this is set up for .38 super.

 

[chazroh]

There should be 4 Allen bolts to take the tool head off. Dies don’t come out without tool head off

 

[TheDoubleD]

Pm sent cause I want it!

There should be 4 Allen bolts to take the tool head off. Dies don’t come out without tool head off

Okay thanks.

I have the other loader figured it out--its a 1050. I have that one figured out.