I bought both 99% alcohol & liquid Lanolin from Amazon & mix 12 to1
I used one shot for years, as did my dad, neither of us had any issues.
For savings i started buying wd-40 dry lube. Works just as well as one shot.
You spray it on, let it dry and start sizing.
Now, i get lc 308 brass that has been through a machine gun, i deprime, wet tumble and dry. Wet tumbling removes ALL previous oils from those cases and take a good amount of force to resize using one shot/wd40 dl. So i mix iso red/lanolin 12:1 to size those cases back to 308 then dry tumble and anneal.
OR
After drying i run them through the dry tumbler that has case polish in it then spray lube with one shot/wd40 dl and they are a lot smoother.
I anneal, Then they get sized down to 7/08, 260, or 243 whatever i need at the time.
Sent from my WIENER using Tapatalk
For savings i started buying wd-40 dry lube. Works just as well as one shot.
You spray it on, let it dry and start sizing.
Now, i get lc 308 brass that has been through a machine gun, i deprime, wet tumble and dry. Wet tumbling removes ALL previous oils from those cases and take a good amount of force to resize using one shot/wd40 dl. So i mix iso red/lanolin 12:1 to size those cases back to 308 then dry tumble and anneal.
OR
After drying i run them through the dry tumbler that has case polish in it then spray lube with one shot/wd40 dl and they are a lot smoother.
I anneal, Then they get sized down to 7/08, 260, or 243 whatever i need at the time.
Sent from my WIENER using Tapatalk
Similar threads
