After seeing some other people get crafty and make some blades I decided I should give it a go. I cut this piece from some super crusty pitted c-channel I had laying out back behind the shop. I had to ride the grinder on this guy for 30 min just to take out most of the pitting. I think with a couple of cheap tools and better stock material I can maybe turn out something half decent. Let me know what you guys think. I only spent about 7 hours on this one. Most of which was getting out all the pitting. Also this is my first paracord wrap.
Sorry for the poor lighting.
[Broken External Image]
[Broken External Image]
[Broken External Image]
Sorry for the poor lighting.
[Broken External Image]
[Broken External Image]
[Broken External Image]