Well got a 223 casing stuck in my neck sizing die today. Any advise on how I go about getting it out?
Edit: type of die is Lyman
Edit: type of die is Lyman
Last edited:
I don't reload, but it might help to mention what equipment you're using.
Luck.
___
Luck.
___
+1 on what Mac said and are you lubing the inside of your case . I skipped that part the first time trying to load rifle rounds and got lucky on about 4-5 cases and then the issue said hello!!
If you were close by, I could help you out. I am a long way from Tulsa.
Pramble has the right info.
Pramble has the right info.
Jerry's has the tool for like $11.
When I bought mine, they told me they would do it if I couldn't get it out.
When I bought mine, they told me they would do it if I couldn't get it out.
drill, Tap, bolt, washer and your finished. Stuck cases are easy to remove from dies. PITA as it takes away from reloading time. I've never had one but have removed stuck cases from several friends.
what in the world are your freaky friends into?
I wonder if you could double nut the top of the threaded shaft and twist it in deeper and get the case out.
I would spray some kind of oil down the shaft or somewhere into the die if you can.
I read these reviews on that die.
https://www.amazon.com/Lyman-5-56-mm-Carbide-Neck-Size/dp/B008YEYGDG#customerReviewsYou are not the only one with this issue.
I would spray some kind of oil down the shaft or somewhere into the die if you can.
I read these reviews on that die.
https://www.amazon.com/Lyman-5-56-mm-Carbide-Neck-Size/dp/B008YEYGDG#customerReviewsYou are not the only one with this issue.
Similar threads
