Umm, this video might help if you can slow it down.
Last edited by a moderator:
http://rugerpistolforums.com/forums/lcp-technical/111-caution-disassembly-lcps-hammer-block.html
From Post #26:
You have to follow vdotmatrix’s instructions closely especially concerning the reset of the hammer block and inserting a pin to lock the block forward. Get it wrong and the alloy frame will not slide back into the grip.
From Post #26:
You have to follow vdotmatrix’s instructions closely especially concerning the reset of the hammer block and inserting a pin to lock the block forward. Get it wrong and the alloy frame will not slide back into the grip.
Last edited:
Might be relevant.
http://rugerpistolforums.com/forums/lcp-technical/111-caution-disassembly-lcps-hammer-block.html
eta: beat me to it...
http://rugerpistolforums.com/forums/lcp-technical/111-caution-disassembly-lcps-hammer-block.html
eta: beat me to it...
I found that post too.
Tried that doesn't work, I can push the Hammer block forward and get the alloy frame in but it still doesn't function correctly the trigger stays back and the hammer is locked in place won't move.
and I didn't even mess with the trigger spring on the front of the alloy frame
Should upload in 11 mins
[video=youtube_share;sxU3CVHVQDw]http://youtu.be/sxU3CVHVQDw[/video]
Last edited:
I didn't dissemble the trigger half of the alloy frame
The spring on the Hammer block faces down and is wound counter clockwise (The only way it makes sense)
[Broken External Image]
http://www.youtube.com/watch?v=sxU3CVHVQDw
The spring on the Hammer block faces down and is wound counter clockwise (The only way it makes sense)
[Broken External Image]
http://www.youtube.com/watch?v=sxU3CVHVQDw
Last edited by a moderator:
I edited my post above.
http://rugerpistolforums.com/forums/...mer-block.html
From Post #26:
You have to follow vdotmatrix’s instructions closely especially concerning the reset of the hammer block and inserting a pin to lock the block forward. Get it wrong and the alloy frame will not slide back into the grip.
http://rugerpistolforums.com/forums/...mer-block.html
From Post #26:
You have to follow vdotmatrix’s instructions closely especially concerning the reset of the hammer block and inserting a pin to lock the block forward. Get it wrong and the alloy frame will not slide back into the grip.
i can get the allow frame in and the pins inserted but the pistol doesnt work.
Looks like you are pushing the hammer catch/block forward with a screw driver but its supposed to be held forward by inserting a pin into a hole in the frame which locks it forward. At least that's what I gather from reading the thread that I posted. Try it the way they describe and see if that solves your problem.
i dont see a hole in the frame or have a pin that would hold it foward.
about 4:08 in the video:
Last edited by a moderator:
