I'd be worried about the piston rings getting leaky if it's burning that much oil.
Those are NGK I think..I have had luck cleaning combustion chambers and any exhaust screens etc. will save build up on plugs then maybe use some seafoam etc
Yep. Using NGK PLUGS
USING NO ETHANOL GAS.
Spark arrestor?
i did chhange the oil but I am topping it off before every mow now.
been using 10w-40 or 40w IIRC
i need to open it up and look at the valves And pistions i guess.
might try some seafome or tranny fluid like mentioned.
been using some stabil but my gas get used pretty quickly(every 2-3 weeks).
USING NO ETHANOL GAS.
Spark arrestor?
i did chhange the oil but I am topping it off before every mow now.
been using 10w-40 or 40w IIRC
i need to open it up and look at the valves And pistions i guess.
might try some seafome or tranny fluid like mentioned.
been using some stabil but my gas get used pretty quickly(every 2-3 weeks).
Last edited:
Thinking out loud here, but can that "seal your head gasket at home by pouring it in the radiator" stuff hurt a small engine? Worked great on my truck.
No water in this engine. Air cooled
Compression?
Idk. I'd have to find a compression Gauge
@SlugSlinger
seafoam or marvel mystery oil!
seafoam or marvel mystery oil!
Seafoam to clean and clear out the combustion chamber and upper cylinder lubricant. You can mix it with gasoline or pour it in the carb in small metered amounts. It will smoke like crazy. If you think there’s gunk in the crankcase you can mix it with the oil.
