Auto metal fabrication

[cyberslider]

Hey all - anyone know of someone or some place that does metal fabrication? Got an older Landcruiser that I need bumper brackets for. I've called numerous Toyota dealers to try and find them. Toyota doesn't offer them anymore and no one had them in stock. They are originally riveted to the frame rails and, apparently, very hard to find in usable condition. I don't have a template to go by either because the a previous owner had cut the old ones off with a torch.

Any ideas?

Thanks,

 

[brennan]

DPI on the board. I believe he is in Claremore. He has several pics posted so do a search and look at his work.

 

[dennishoddy]

Shouldn't be too hard to fab for any machine shop. Call around.

 

[willystruck]

You might try some salvage yards.

 

[UnSafe]

If you can draw an accurate diagram, try
Chickasha Industrial. Surprising what those boys are capable of.

 

[Shoot Summ]

You might PM Prophet as well, he may be closer than DPI, both do outstanding work....

http://www.okshooters.com/showthrea...-(metal-copper-ect)-pic-heavy&highlight=metal

 

[DPI]

Cyberslider - I would help you out if you were closer. Without having access to the rig, it would be tough to custom fit the brackets.

From the pictures, Prophet definitely has some skills! His work looks like art!

Here's some of the stuff I have done. dpi

 

[dx3]

What year landcruiser? Have you tried Cruiser Corps in OKC?

Jonny

 

[cyberslider]

What year landcruiser? Have you tried Cruiser Corps in OKC?

Jonny

1983 FJ60 - yes I have tried Cruiser Corps - thanks Jonny

 

[cyberslider]

Thanks to all who replied - I will contact Prophet